You are in charge of setting up the AWS Direct Connect connection between your on-premises data center and an AWS Partner location. You need to ensure that your network can support the connection. What needs to be in check for this? Choose 3 answers from the options given below.

Answer options:

A.The network must have support for 802.1Q VLAN.
B.The network device must support BGP.
C.The network device must support Static Routing.
D.Auto-negotiation for the port must be disabled for the network device.

Answer – A, B and D
Following are the requirements given in the AWS Documentation for AWS Direct Connect.
· Your network must use single mode fiber with a 1000BASE-LX (1310nm) transceiver for 1 gigabit Ethernet, or a 10GBASE-LR (1310nm) transceiver for 10 gigabit Ethernet.
· Auto-negotiation for the port must be disabled. Port speed and full-duplex mode must be configured manually.
· 802.1Q VLAN encapsulation must be supported across the entire connection, including intermediate devices.
· Your device must support Border Gateway Protocol (BGP) and BGP MD5 authentication.
· (Optional) You can configure Bidirectional Forwarding Detection (BFD) on your network. Asynchronous BFD is automatically enabled for AWS Direct Connect virtual interfaces, but will not take effect until you configure it on your router.
Option C is invalid because the network device must support BGP routing.
For more information on AWS Direct Connect, please refer to the below URL:
https://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html