Refer to the exhibit. What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address 10.20.20.1/24? 

Answer options:

A. R1(config)#interface ethernet0/0 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1 255.255.255.0
B. R1(config)#interface ethernet0/0.20 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1 255.255.255.0
C. R1(config)#interface ethernet0/0.20 R1(config)#ip address 10.20.20.1 255.255.255.0
D. R1(config)#interface ethernet0/0 R1(config)#ip address 10.20.20.1 255.255.255.0

B